New Generation AUTOOL SDT-106 Car Smoke Machines For Cars Leak Locator Automotive Diagnostic Leak Detector SDT106

$245.00 $154.35

AUTOOL SDT-106 Smoke Machine


Main Unit Structure:

SDT-106 is designed for detecting the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank. Kindly Note:SDT-106 is for all pipe systems except EVAP. Hook: To hang the detector when detecting Working Indicator: It is lit when the detector works Power Switch: Power it on, and the detector works Smoke output tube: The smoke outlet which connecting with detection port Power clip: To connect with vehicle battery. The voltage is DC12V. Cautions: 1.When you use this detector the first time, please fill 20-30ml oil, not beyond this range. 2.New oil can be filled with only when the smoke is light,and it can’t be filled over 15ml every time. 3.Before filling new oil, please pour out the remaining oil in the detector. 4.Please replace the detector oil regularly. 5.When you pour oil ,please wait 10-15 minute ,then open machine it will better for machine Operation 1.Open the engine cover, and hang the detector in the cover. 2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle. Please secure the other side with a rubber stopple. 3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube. 4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way. 5.Turn on the power switch, and detector starts to work. 6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary. 7.After leak detection, please connect well the wires and pipe. 8.Notes: * Please do leak detection away from smoke-sensitive parts. * Not suitable for EVAP. * Do not run the detector over 8 minutes. It needs interval rest. * The detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later. * The round parts of this detector is with temperature, be careful to avoid scalding injury. Maintenance With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the service life of smoke generated part, so please change smoke and oil regularly. 1.Before filling new oil, please pour out the remaining oil in the detector. 2.When the smoke output has water drops, please replace with new oil. 3. Liquid paraffin and baby oil are OK. 4.Please fill new oil with equipped oil bottle Product Information Power: DC12V, vehicle battery Smoke output value: 6l/min Built-in air supply Packing List. 1.Main Unit 2.Hook (with hand-tighten nuts) 3.Rubber stopples (with serial specification) 4.Taper stopple 5.Taper pipe 6.30ml oil bottle 7. User manual

Every product will be tested before sending to you to make sure it works excellently!

Your feedback is very important to our business development, we sincerely invite you to leave us all perfect 5-stars feedback,we will be grateful

if you dissatisfied with it, pls kindly contact us immediately

We will solve the problem and satisfy you

  • Special Features: Smoke Detector
  • Car Maker 003: Smart, Subaru, Suzuki, Tata, Toyota, Volvo, VW, Yamaha
  • Model Name: AUTOOL SDT-106
  • Item Height: 40cm
  • Car Maker 006: Audi, Australia Ford, Benz, BMW, Brilliance, Demo, Fiat, Ford, GM
  • Hardware Version: NEWEST
  • Car Maker 002: Chevrolet, Chevy, Chrysler, Citroen, Dacia, Dadi, Daewoo, Daihatsu
  • SDT-106: detecting the leakage of pipe systems
  • Software Version: NEWEST VENSION
  • Language: english
  • Item Width: 20cm
  • Car Maker 005: Kia, Lancia, Land Rover, Mahindra, Maruti, Mazda, Mitsubish, Nissan
  • Item Length: 30cm
  • Material Type: High Quality
  • Item Weight: 5kg
  • Color: yellow
  • Car Maker 004: GM, Holden, Honda, Hyundai, Isuzu, Jaguar, Kia, Lancia, Land Rover
  • Brand Name: AUTOOL
  • Power: W
  • Car Maker 001: Opel, Peugeot, Porsche, Renault, Romeo, Rover, Saab, Seat, Skoda
  • Voltage: 12 V
  • External Testing Certification: CE
  • Well-tested before shipping?: YES!
  • Package: Well-packed
  • Electronic: No
  • Used for: or all pipe systems except EVAP
  • Item Type: Gas Analyzers

  • Package Size: 2cm x 2cm x 2cm (0.79in x 0.79in x 0.79in)
  • Unit Type: piece
  • Package Weight: 5.0kg (11.02lb.)

  • Author: Kelcrow1119
  • Date: 2017-10-25
  • many thanks ORDER excellent
  • 5/5

  • Author: Kalysh Uzen
  • Date: 2017-10-17
  • Just tried it. And so far it works very good. shipping was very fast. about a week to canada
  • 5/5