Z&W manufactures only the highest quality valves. Use 075D/100D series valves in locations where the use of a separate pressure vacuum breaker (PVB) or a double-check valve is required by city codes to protect against back flow. Check your local city codes to determine what type of valves are required. All of our valves work with any standard sprinkler timer. Double-filtered pilot-flow design for maximum reliability. Balanced-pressure diaphragm for long life. External bleed to manually flush system of dirt and debris during installation and system start-up. Internal bleed for spray-free manual operation. Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter. Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring. 1.25" (3,2 cm) stainless steel phillips head screws. Available as: 3/4" (20/27) and 1" (26/34) standard in-line configuration. 1" (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations. 1" (26/34) Angle (A) configurations for flexible installations especially when submains are deep. 1" (26/34) Male-by-Male (MM) thread configuration for quick and easy manifolding. Pressure: 15 to 150 psi (1,0 to 10,4 bar) 075D-AC Non-Flow Control Model: 0.2 to 22 GPM (0,05 to 5,0 m3/h; 0,01 to 1,39 l/s). For flows below 3 GPM (0,68 m3/h; 0,19 l/s) 100D-AC Non-Flow Control Model: 0.2 to 40 gpm (0,05 to 9.085 m3/h; 0,01 to 2,52 l/s). For flows below 3 gpm (0,68 m3/h; 0,19 l/s) Temperature: Up to 110° F (43° C) Ambient air temperature: Up to 125° F (52° C) 24 VAC 50/60 Hz (cycles per second) solenoid power requirement: 0.41 A (9.8VA) inrush current; 0.28 A (6.7 VA) holding current Solenoid coil resistance: 39 Ohms

  • Material: Plastic
  • Model Number: 100D-AC
  • Type: Watering Kits

  • Unit Type: lot (2 pieces/lot)
  • Package Weight: 1.0kg (2.20lb.)
  • Package Size: 14cm x 8cm x 12cm (5.51in x 3.15in x 4.72in)