sale

Gate vehicle access control dual two Channel Loop Detector/Inductive Loop Parking DetectorsAC220V/AC110V/DC24V/DC12V

Rating
$35.46





PARAMETERS:

Supply voltage: 230V AC , 115V AC, 24V DC/AC, 12V DC/AC ( See the label on the detector)

Voltage tolerance AC: +10% / -15%

Voltage tolerance DC: ±15%

Power Consumption: 4.5VA

Output relays: 240V/5A

Operating temperature: -20°C to +65°C

Storage temperature: -40°C to +85°C

Frequency range: 20 kHz to 170 kHz

Reaction time: 10ms

Signal holding time: Unlimited / limited when loop is permanently covered 10 minutes

Sensitivity: Adjustable in 4 increments

Loop inductance: Total loop plus connection wiring: 50μH to 1000μH.

Ideal is 100μH to 300μH

Loop connection wiring: Maximum length 20 meters, twisted at least 20 times per meter

Size of Housing: 78x40x108 mm (L x W x H)

Automatic Sensitivity Boost

Automatic sensitivity boost is selected by DIP5 switch on the front of the enclosure and is set as follows:

OFF - Disabled, ON – Enabled.

Automatic sensitivity boost causes the sensitivity to be boosted to a maximum on detection on the vehicle,

and maintained at this level during the presence of the vehicle over the loop.When the vehicle departs the loop and detection is lost the sensitivity reverts to the pre-selected level.

Output Relay

If DIP7 is “OFF” site, when a vehicle is detected passing over the inductive loop, the relay1 and relay2 are energized;

When the vehicle is detected departing the loop, the relay1 and relay2 are de-energized.

If DIP7 is “ON” site, when a vehicle is detected passing over the loop, the relay2 is energized; When the vehicle is detected departing the loop, relay2 is de-energized , and delay 500 ms, the relay1 is energized for 500 ms.

Functions & Features :

1) Reset Switch : The reset switch enables the detector to be manually reset during

registering and testing and it is a process of system recovery;

2) Selectable Pulse Time : This feature sets the length of time that the pulse relay will be lasting for 1 Second or 0.5 Seconds ;

3) Pulse Relay Selection : The Pulse Relay may be configured to energize on detection of a vehicle or when the vehicle leaves the loop;

4) Sensitivity Reinforcement : This feature sets the un-detecting level to a maximum sensitivity to prevent failing to detect vehicles as big trucks;

5) Switch Sensibility Adjustable : 4 sensitivity setting are available on the switches to change sensitivity ;

6) Switch Frequency Adjustable : 4 frequency settings are available to prevent signal interference with neighboring loops ;

7) Filtering Option : This option is used to provide a delay between detection of the vehicle and switching of the output relay . This relay is normally used to prevent false detection of small or fast moving objects ;

8) Permanent Presence Option : This feature ensures the detection of the vehicle will be maintained when the vehicle stays within the loop area for extended periods

Technical Data:

1. Supply voltage: AC110V or 220V

2. Voltage tolerance AC: +10% / -15%

3. Voltage tolerance DC: ±15%

4. Power Consumption: 4.5VA

5. Operating temperature: -20°C to +65°C

6. Storage temperature: -40°C to +85°C

7. Frequency range: 20 kHz to 170 kHz

8. Reaction time: 10ms

9. Signal lasting time: Unlimited / limited when loop is permanently covered 10 minutes

10. Sensitivity: Adjustable

11. Loop inductance: Total loop plus connection wiring: 50μH to 1000μH; Ideal is 100μH to 300μH

12. Loop connection wiring: Maximum length 20 meters, twisted at least 20 times per meter

13. Dimension: 78x40x108 mm (L x W x H)

  • Model Number: PD232
  • Security Mode: Fail Secure with Signal
  • Place of Origin: Guangdong, China (Mainland)
  • Packaging: carton
  • Brand Name: KINGJOIN&GALO
  • Direction: None
  • Color: AC110V, AC220V, DC24V, DC12V

  • Unit Type: piece
  • Package Size: 12cm x 5cm x 9cm (4.72in x 1.97in x 3.54in)
  • Package Weight: 0.35kg (0.77lb.)