sale

Galo 24V DC PCB board ofAutomatic Double arms swing gate opener control panel , motor ( Remote option )

Rating
$48.50





Package:

1 PCB board of swing gate opener 24V

2 X remote control (it will be prepared as you choose on quantity, when you choose no remote, it means, there is no remote control in package)

(for the pcb board, it should work with our remote control)

Swing Gate Control Panel

Application:Used for DC swing gate opener

Voltage: DC 24V

Protection fuse: 10A

Modulation: ASK modulation

Board Memory: 120 rolling code transmitters

Frequency: 433.92mhz (other frequency customized)

Output Voltage: DC 24V

Features :

1. Digital LED Menu brings a easy setting,plug and play.

2. Open/Close single leaf or double leaves.

3. Separate force setting for motor 1,motor 2 and high speed, slow speed brings the motors working accurately.

4. Auto-closing time can be adjusted from 1 second to 99 seconds.

5. Total 60’s working time to protect the motors.

6. Terminals available for loop detector, photocell, push button, keypad, access control equipment etc.

7. Compatible with both electric lock and electromagnetic lock.

Extra relay out put for lock of pedestrian door or other external devices.

8. Custom rolling code makes the system more secure.

9. Available to connect back up battery or solar system.

SWING GATE OPERATOR 1. 2 SIDE terminal is used for connecting any external device that operates double gate 2. COM terminal is COMMON used for connecting the “ground” of external devices 3. 1 SIDE terminal is used for connecting any external device that operates single gate 4. Swipe Card terminal is used for connecting any external devices that will operate to open the gate 5. COM terminal is COMMON used for connecting the “ground” of external devices 6. Infrared terminal is used for connecting photo electric sensor 7. 12V DC output is used for connecting photo electric sensor (Continuous output current 8. 24V battery output is used for connecting the back up battery + 9. 24V battery output is used for connecting the back up battery - 10. 24V DC output is used for connecting external device. (such as photo electric sensor, max current output 1A) 11. GND is used for connecting the “ground” of external devices 12. 24V DC lamp output is used for connecting flash light +. 13. 24V DC lamp output is used for connecting flash light -. 14. 24V DC lock output—the NF terminal which used for connecting the electric lock 15. COM is COMMON used for connecting the “ground” of lock 16. 24V DC lock output—the NA terminal which used for connecting the magnetic lock 17. 24V DC alarm output 18. 24V DC alarm output 19. and 20. Motor1 terminal is used for connecting the motor 1 installed on the gate that opens later and close first. This terminal connect 1st red wire (counted from your left hand side to right hand side) 21. and 22. Motor2 Delay terminal is used for connecting the motor 2 installed on the gate that opens first and close later. This terminal connect 1st blue wire (counted from your left hand side to right hand side). NOTE! If for single gate, the gate motor just can connect the Motor2 Delay terminal. 23. AC24V input is used for connecting the transformer 24. AC24V input is used for connecting the transformer 25. digital display is used for showing you the setting data 26. INC+ is used for figure increase when setting the data 27. FUN is used for store the data 28. DEC- is used for figure decrease when setting the data 29. Learning button is used for program/remove remote

  • Direction: None
  • Security Mode: Fail Secure
  • Brand Name: GALO
  • Model Number: PKM

  • Package Size: 20cm x 20cm x 10cm (7.87in x 7.87in x 3.94in)
  • Unit Type: Set
  • Package Weight: 0.65kg (1.43lb.)

  • Author: Vikysik 122
  • Date: 2018-04-03
  • free Price So pay me a Headdress custom houses a Been high.
  • 4/5

  • Author: Hondapaymybills
  • Date: 2017-12-20
  • circuit is not
  • 2/5