Please note that we are selling factory direct products. All our products are 100% brand new in manufacturer\'s packaging.

Code Option

Thread Option: G and NPT

Standard Voltage Option: DC12V,DC24V,AC110V,AC220V

Material Option: Stainless Steel

Oil Seal Option:VITON

Type: Normally Open

Descriptions

2S160-15-K-V

2S200-20-K-V

2S250-25-K-V

2S350-35-K-V

2S400-40-K-V

2S350-35-K-V

Port Size (G&NPT)

1/2\'\'

3/4\'\'

1\'\'

1-1/4\'\'

1-1/2\'\'

2\'\'

Orifice Size(mm)

15

20

25

35

40

50

CV Value

4.8

7.6

12

24

29

48

Type

Normal Open

Way Position

2/2 Way

Material of Body

Stainless Steel

Motion Pattern

Direct Drive

Working Temperature

-20-120\'C

Working Pressure

Water/Oil:0~0.5Mpa Air/Gas:0~0.7Mpa

Material of Seal

VITON

Voltage

AC110V,AC220V,DC12V,DC24V

Voltage Range

±10%

Liquid

Water Oil Gas Air Acid etc

Coil

DIN Connector

Description: Two position, two way, normal close switch, magnetic solenoid water valve. Can be installed at any angle, but it is a good choice when the horizontal tube keep upward. Used to control automatically the liquid and gas in the pipeline.

General purpose 2way direct acting and semidirect lift acting valves.

Common applications include water, oil (below 20cst), air, gas, freon, *vacuum, weak acids & alkali.

Available in a body/seal material of brass/NBR or stainless steel/viton.

The coil has an adapter with screw terminals for wire leads.

Simple connect wires to the adapter and plug right into the coil for operation.

Adapters can be removed from the coil for maintenance with no need to detach wires.

Brass/NBR valves are suitable for water, hot water, gas, air, non-corrosive oils and freon.

Stainless Steel/Viton valves are suitable for hot water, acid, alkali, chemical salt, oils and hydrocarbon.

Direct Acting: These valves close or open completely on their own.

This means that they can block the flow of fluid in both directions.

SemiDirect Acting: These valves can only stop flow in one direction.

There is an arrow located on the valve body showing the direction of flow in which it blocks.

In order to prevent backflow when the valve is closed, a check valve must be installed.

  • Pressure: Medium Pressure
  • Model Number: 2S
  • Brand Name: NYPF
  • Material: Plastic,Stainless,Copper
  • Structure: Control
  • Port Size: 1/4''-2''
  • Temperature of Media: Medium Temperature
  • Media: Water
  • Standard Voltage: 12V,24V,110V,220V
  • Coil: IP67 DIN Connector
  • Seal: VITON
  • Power: Solenoid
  • Type: Normally Open
  • Standard or Nonstandard: Standard

  • Package Weight: 5.0kg (11.02lb.)
  • Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
  • Unit Type: lot (5 pieces/lot)