Remote Control Toys

Matek F405-STD STM32F405 F405 with OSD Flight Control Board DShot outputs For RC Multicopter


MCU: 168MHz STM32F405RGT6 IMU: 32K ICM20602 gyro/accelerometer (SPI) Baro: BMP280 (I2C) OSD: BetaFlight OSD w/ AT7456E chip Blackbox: MicroSD card slot (SD/SDHC) VCP, UART1, UART2, UART3, UART4, UART5 Built in inverter for SBUS input (UART2-RX) PPM/UART Shared: UART2-RX SoftSerial on TX2, S5 or S6 optional Camera control on S6 or DAC optional Smartaudio & Tramp VTX protocol supported Battery Voltage Sensor: 1:10 Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option) BEC 5V: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option) LDO 3.3V: Max.300mA I2C1 SDA & SCL: Yes WS2812 Led Strip : Yes Beeper : Yes RSSI: Yes 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) 6x PWM / DShot outputs without conflict 2x 2812LED outputs option 5x UARTs 1x Group of 5V/G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible) 1x pair I2C1 pads 1x Side-press button for BOOT(DFU) mode 1x 16pin bottom mounted FFC Slot for FCHUB-6S, FCHUB-VTX or FCHUB-W connection 36x36mm PCB with 30.5mm mounting holes w/ 2x 0.5mm*16Pin 5cm Flexible Flat Cable w/ 4pcs M3 Anti-vibration Standoffs Package included :

1x F405-STD flight control board 4x Anti-vibration Standoffs

  • RC Parts & Accs: Motors
  • Tool Supplies: Grinded
  • Use: Vehicles & Remote Control Toys
  • Material: Metal
  • Remote Control Peripherals/Devices: Receivers
  • Four-wheel Drive Attributes: Slot
  • Model Number: OEM
  • Technical parameters: Value 3
  • Upgrade Parts/Accessories: Gear
  • Brand Name: Readytosky
  • For Vehicle Type: Airplanes

  • Package Weight: 0.2kg (0.44lb.)
  • Package Size: 18cm x 16cm x 12cm (7.09in x 6.30in x 4.72in)
  • Unit Type: Set