3 IN 1 Battery Balancer LCD Display - MKS Align Li Po+ Register
3in1 RC 2s-6s Lipo Li-Fe Battery Balancer LCD+Voltage Meter Tester+Discharger
The Battery Meter/Balancer/Discharger is designed for Li-Polymer and Li-Fe battery, it can measure battery voltage precisely and balance cell voltage in battery pack, or discharging battery for long time storage.
The balance function can be executed before/after battery charged, or during battery charging process, to ensure battery pack keeping in excellent condition.
Safe and convenient: it supplies instant voltage reading and indicates abnormal cell immediately.
Allow Li-Polymer/Li-Fe 2-6 cell balancing and discharging.
With its JST connector for external power, the balancer can measure voltage of receiver battery.
The big LCD screen can show 6 cell batteries\' condition.
Only 3 control keys for easy single-handed control.
Thermal design on the backside for ventilating and preventing overheating.
Detailed instruction sheet is included.
Small size and light weight, it is easy to carry.
Measurable battery type and amount:
Li-Polymer/Li-Fe 2-6 Cell (standard voltage 7.4V-25.2V using divided voltage connector)
Receiver battery 1.2V-12V DC (Not battery type limit, but need external power 7.4V-25.2V, use JST connector)
Balance voltage setting range (lower limit): 2.0V-3.9V (pre-setting value 3.3 V)
Discharge voltage setting range (lower limit): 3.0V-4.2V (pre-setting value 3.9V)
Item size: 9.3 * 6 * 1.7cm
Item weight: 71g
Package size: 10.5 * 6.5 * 4.4cm
Package weight: 120g
1x Battery Voltage Meter 100% Brand New.
Item location is at China, default shipping service is shipping by China register Air
Mail or HongKong register air mail
Please be advised that International shipping usually take longer than domestic, as it\'s based on shipping service provider and customs.
All items will be shipped within 1-3 business days upon receipt of payment (except Saturday ).
Asian countries 5-15days
UK, Ireland 10-20days
Spain, Greece, Germany&western european countries 10-21days
France, Italy&other countries 15-28days
If the package weight is more than 2kg or the package size is larger than 90CM, we will use EMS etc or Ship with two parcels by China post air mail.
Instruction:the weight and size we marked in the package details is not the actual weight and size of the goods, if you need to know the actual weight and size, you just need to contact us.
3. Bank transfe
Returns: For ensuring all the items are in good quality, we will test all products before the packages were sent out . 30 days warranty from the purchased date. Please contact us via email before returning the defective item. Return items should include the original packaging and all accessories. Only defective product will be offered exchange.
- For Vehicle Type: Airplanes
- RC Parts & Accs: Batteries - LiPo
- Use: Vehicles & Remote Control Toys
- Model Number: T423
- Place of Origin: Guangdong, China (Mainland)
- Material: Plastic
- Remote Control Peripherals/Devices: Battery Charging Units
- Plastic Type: ABS
- Package Weight: 0.2kg (0.44lb.)
- Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
- Unit Type: piece
Matek System 20*20mm F411-mini Mini F4 Flight Controller AIO OSD BEC and LED Strip for RC Drone Quadcopter Models Spare Part DIY
Specification: Brand Name: Matek Item Name: 20x20mm Mini F4 Flight Controller AIO OSD BEC and LED Strip MCU: 100MHz STM32F411 IMU: MPU6000 OSD: BetaFlight OSD w/ AT7456E chip Camera control supported on
INJORA Metal Black Front Bumper with Light for 1/10 RC Crawler Car Traxxas TRX-4 Axial SCX10 & SCX10 II 90046
INJORA Metal Black Front Bumper with Light for 1/10 RC Crawler Car Traxxas TRX-4 Axial SCX10 & SCX10 II 90046 Features: Made of high quality metal Comes with
DLE120 Carburetor Original For 85cc 111cc 120cc DLE Gas Engine Shipping 1.Please confirm your address carefully once you make th order.We will send the products to you at once the payment is received 2.Item is shipped from
DOIT One Set Accessory for Robot Car Chassis Phi 4mm Including Diameter 65mm Wheel+1pcs Motor 12V 320rpm Robotic Model DIY RC
Name: 65mm metal wheel; Diametersize: 65 mm; Width size: 14mm; Weight: 100g Material: Aluminumalloy Bearing load: 100kg The outside is rubber, the hub (rim) is metal. Motor Parameters : Voltage:
2PCS HSP RC Car Aluminum 03009 Battery Cover Post 103009 Parts For 1:10 RC car HSP 94103 94107 94111 94123 94170
HSP 103009 03009 Applicable scope: 94103/94107/94111/94123/94170 ...others 1)Your Feedback is really important to us, please take a few seconds to leave great feedback if you are satisfied with our product or service, thank
1pcs 40mm OD x 38mm ID x 1000mm Roll 3k Carbon Fiber tube /Carbon Tubing , wing tube Quadcopter arm Hexrcopter 40*38
With 100% Japan import carbon fiber with EXCELLENT quality. Our tube is roll tube, not pultrusion tube, roll tube was have the longitude and weft yarn, but pultrusion tube only have the longitude, not weft yarn, so, the strength not
Original FS 62T Racing Brushless 1:10 Electric Car RC Spare Parts RC Hobby Accessories
Global selling aircraft parts MJX X600 X601H helicopter spare parts 7.4V 700mah lithium battery 603048 battery
Global selling aircraft parts MJX X600 X601H helicopter spare parts 7.4V 700mah lithium battery 603048 battery Package includes: 1PCS lithium battery
16pcs/lot New Carbon Fiber Tube 3K for Quadcopter Multicoptor 3mm/4mm/5mm/7MM 0.5 meter Wholesale(500mm)
Product name: 3mm*2mm carbon nanotubes Product specifications: outside diameter: 3mm inner diameter: 2mm length: 0.5m Product name: 4mm*3mm carbon nanotubes Product specifications: outside diameter: