Printer Supplies

For Epson Ink Cartridge Chip Resetter for Epson Stylus Pro 3800 / 3800C / 3850 / 3880 / 3890 / 3885

Rating
$19.89





Chip Resetter for / 3800C / 3850 / 3880 / 3890 / 3885 Ink Cartridge

Printer Compatibility: for Epson Stylus Pro 3800 / 3800C / 3850 / 3880 / 3890 / 3885

Packing Size: 3.1" x 3.1" x 1.97" (80 x 80 x 50mm)

Gross Weight: 0.041kg

Feature:

1. Our chip resetter guarantee special use on your for Epson Stylus Pro 3800/3880 ink cartridge chip.

2. It could be reseted not only the for Epson Stylus Pro 3800/3880 ink cartridge but also maintenance tank.

3. After resetting you could continue use your Ink Cartridge. It helps the ink cartridge work longer saving your money.

The usage of for cartridge chip resetter:

1. Reset the Ink Cartridge chip before the ink level fall to 15%.

2. Fit the chip to the groove of chip resetter, and enable the probe of chip resetter contacts the contactor of the chips.

3. Press the 2 components together. If the red light gleams, it means the connection is fine.

4. Five seconds later, the red light turns to green, and it indicates the chip data has been refreshed.

The printhead is required to be installed by professional persons.

Attention:

1.Before installing print head,you must make printer power off.

when finish installing,you can pushing a car moving gently With handle to check the head install ok or not.

2.Don’t contact ink when you insert the head cable.

And make sure contact well with the socket.If not,that maybe make the head short circui.

3.check cartridge’s ink is full or not,if cartridge’s ink level is too low,it will damage the head.

4.check wiper and capping is dirty or not.If direty,you need to change them.

5.The head may have air inside the nozzle, so would not be normal print,

it can only be normal after the head of the air discharge completely out line.

The internal air needs to completely discharged before it can be used normally.

Print Head Return Requirements:

All our print heads are highprecision commodity and brand new, after receiving the goods,

please first confirm print head model and specifications, any problem, please contact with our sales

staff as soon as possible.

Any problem after the print heads are installed and used will be non-refundable.

  • Brand Name: YILINUOSI
  • Type: Other
  • Model Number: for Epson Ink Cartridge Chip Resetter for Stylus Pro 3800 / 3800C / 38
  • Color: Other,White

  • Package Size: 15cm x 15cm x 10cm (5.91in x 5.91in x 3.94in)
  • Package Weight: 0.28kg (0.62lb.)
  • Unit Type: piece