New products dc 36v to ac 220v solar grid inverter pure sine wave out 1000w
new products dc 36v to ac 220v solar grid inverter pure sine wave out 1000w
1.Generates pure Sine Wave
2. Automatic power adjustment
3. Constant Power Output
4. Low distortion output on all ranges
5. Allow different Power factor from loads
6. Compact and light weight design
7. Maximum Power Point Tracking (MPPT) - optimize power output
8. Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring
9. Stackable (connect in parallel for higher output)
10. Aluminum enclosure will act as heat sink to help dissipate heat
11. Simple and safe installation
12. Island protection: Inverter will shut down during black outs.
13. Grid-Tied - sell green power directly back to the grid at a premium rate
Specification for 1000W Solar Inverter On Grid 24V~45V DC
24-45V series models
Grid inverter working conditions The electrical utility grid must have current and voltage is 230VAC(190~260VAC)
Recommend use solar panels
DC Maximum Input Power
DC maximum voltage
DC voltage range
Maximum input current
AC output power
AC maximum output power
AC standard voltage range
AC frequency range
50Hz/60Hz(Automatic detection and adjust)
Output current total harmonic distortion
Phase shift rate
Output short circuit protection
Voltage at Pmax
Maximum output power factor
DC TO AC Conversion efficiency
Work temperature range
-25 °C~60°C(skin temperature)
0~99%(Indoor Type Design)
Indoor Type Design
EN 50178+EN 62109-1+VDE0126-1-12
DIN VDE 1026 UL1741
directly connected to the solar panels (do not connect the battery) MPPT using precise function, APL functions, solar panels automatically adjust to maximum output power, simply connect directly to the solar panel grid inverters, do not need to connect the battery.
* AC 0 angle with high precision auto-detection
AC phase angle of 0 through isolation amplifier and input to the MCU for high-precision detection and analysis, the phase shift rate of only thus achieving high-precision AC and combining with the phase modulation. output.
*Synchronous High-frequency Modulation
In the course of the grid, usually with the same phase angle and the net (ie, two-phase alternating current total is equal to 0,
with the switch to the two AC fusion) and the product is first rectified AC half-frequency AC to 100Hz, Then the machine
produces high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation.
* Pure Sine Wave Output
Adopt SPWM to make pure sine wave output directly.
*Power Automatically Locked (APL)
The current strength of the different fluctuations, we should use the MPPT function, when the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, the output power is more stable.
* Maximum Power Point Tracking (MPPT)
Current intensity, voltage constantly changes, if there is no power point tracking, then there will be a lot of problems in the past usually adopted a solar controller, this product uses high-precision MPPT computing power, automatic and immediate to solar panels output power adjustment in the maximum output point, in order to achieve a stable output purposes
* Automatically Adapt To Different Load Power Factor
Adapt to any of the power load.
* Automatically Shut Down When The Power Output Of a Fault
W hen the city power system planning power outage there is a failure, the inverter will automatically turn off the output.
* Current Limit Protection
This product is constant current , constant output power , without any overload, over-current phenomenon.
* Stack Multiple Machines (in the parallel machine used)
Multiple machines in parallel can be used to achieve a small power inverter in parallel for the power output.
* High-Frequency High Conversion Rate
Use high-frequency converter to make high efficiency.
* 6-grade power search
In overcast weather,the solar battery’s output current is extremely tiny, then inverter will automatic open 6-grade power
1. The program can automatically open power adjustment for 6 times.
2, The current direction can adjust from the maximum to the minimum.
3. In automatic adjustment process, we will see the LOW light flashing. And the power will keep as a starting point, from 0 to the maximum output power, and it will restart at most for 6 times, then locked in the maximum power, the ST lamp long bright.
4. It need 10 minutes for 6-grade power search.
1. Installation Connection
(1). Red terminal: Connect DC positive, black terminal: Connect DC negative. Shown in Figure 1.
(2). AC socket: Connection to the mains. The AC cord to the inverter 3 foot outlet, then the AC cord to home 3PIN AC outlet. Are shown in Figure 2, Figure3.
Thanks for visit our store and order our products! When you make the order, please note the following matter:
1. Please leave us output voltage(AC 90V-130V or AC 190V-260V) and outlet Plug (A or B or C or D) so that we can send you the perfect products.
2. Please leave your clear delivery information, special for phone number and contact name.
1. If your address is remote area by DHL or FedEx,then we will send by other express
2. We can low down some price for less customs duty when shipping, please leave the value of product you want us to declare, otherwise,we will declare by our experience; and we will not bear the high tariff cost,buyer must bear the reponsibility by themselves.
- Cooling way: cooling fan
- Output Power: 0-1000W
- Output Type: Single
- Anti-island protection: YES
- Output Voltage: 190-260V AC
- Output Current: 0-5A
- Size: 31*16.5*6cm
- Output Frequency: 46HZ-65HZ
- Output Waveform: pure sine wave
- Certificate: CE&ROHS
- warranty: 2 years
- Type: dc 36v to ac 220v solar grid inverter
- Stackable: YES
- Material: aluminum
- Weight: 2.1KG
- Model Number: TEG-1000W-24-45
- max output power: 1000w
- MPPT Function: YES
- Input Voltage: 24-45vdc
- Unit Type: piece
- Package Weight: 2.8kg (6.17lb.)
- Package Size: 40cm x 21cm x 12cm (15.75in x 8.27in x 4.72in)
DC/DC Buck Converter 5A CC CV 6-36V To 2V-32V MPPT Step-down Voltage Constant Current Solar Charging Panels Controller
Module Name: MPPT 5A Step-down Module Constant Voltage Constant Current Module Properties: Non-isolated buck module (BUCK) Input voltage: DC 6-36V Output voltage:DC 1.25-32V continuously adjustable (the default output 5V)
Pure sine wave 12v 230v dc ac off grid inverter 500w Specifications : 12v 230v dc ac off grid inverter 500w off grid inverter 500w : dc ac off grid inverter 500w : Payment: 1. We accept Alipay, West
CE 5.5kw 220v AC Frequency Inverter & Converter Output 3 Phase ac motor water pump controller /ac drives /frequency converter
Parameters: 1) Input Voltage: 220V(+/-15%) 2) Output Voltage 220VAC 3) Input Frequency: 48-63 Hz 4) Output Frequency: 0-400 Hz 5) Input Phase: 1 or 3 phase 6) Output Phase: 3 phase Description:
DC-AC 300W Pure Sine Wave Inverter 12V To 220V Converters Voltage Off Grid Electric Power Supply LED Digital Display USB China
Features The use of advanced dual-CPU single-chip intelligent control technology, with high reliability, low failure rate characteristics; The use of imported components manufacturing, advanced circuit design, making the inverter conversion