Photo Studio

Timer Remote Cord Removable Shutter for Canon 30D 40D 50D 1D 5D 7D Mark II III

$17.59 $12.31

Introduction This New Arrival Timer Shutter cable has a removable shutter connecting cable. If you have a new different camera, it\'s no need to buy a new set, you just need to buy a related shutter connecting cable to connect with your camera, it\'s very convenient and easy to use it, I think it\'s a very good choise for you. Note: If you need Extra Cables , you can store search " Removable shutter connecting cable " in our shop. Feature: 1. Delay / Self Timer (DELAY) Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds. 2. Interval Timer (INTVL) The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached. 3. BULB/Long Exposure (LONG) It allows you to take time exposures up to 100 hours long. 4. Exposure Count (N) This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times. Specification: ---Self-Timer: 0s to 99hrs 59min 59s in one-second increments ---Interval Timer: 1s to 99hrs 59min 59s in one-second increments ---Long-Exposure Timer (Bulb-mode): 0s to 99hrs 59min 59s in one-second increments ---Exposure Count: 1 times to 399 times (Unlimited). ---Size: 155mmL x 40mmW x 18mmH (6.1\'\' x1.6\'\'x0.7\'\') ---Cable Length of the Timer body: 123cm ---Cable Length of the shutter Cable: 10cm ---Power Supply: AAA Battery 1.5v Packaing: 1 X Timer Shutter Release Cord 1 X Shutter cable (C3 cable) 1 X English Instruction Manual (Original Manufactory Packaging) Suitable for EOS D30, EOS D60, EOS 10D, EOS 20D, EOS 30D, EOS 40D, EOS 50D, EOS 5D, EOS 7D, EOS 5D mark II, EOS 1D,EOS 1Ds, EOS 1D MarkII,EOS 1Ds MarkII, EOS 1D MarkIII,EOS 1Ds MarkIII

  • Type: Wire
  • Model Number: for Canon
  • Compatible Brand: CANON
  • type: For Canon Remote Controls
  • Package: Yes
  • Brand Name: FOTGA

  • Package Weight: 0.2kg (0.44lb.)
  • Package Size: 20cm x 20cm x 5cm (7.87in x 7.87in x 1.97in)
  • Unit Type: piece