Needle Arts & Crafts

Household Sewing Machine Part Binder Foot Domestic Multi-Function Sew Machine Accessories Shell Hemmer Presser Foot

Rating
$1.98 $1.82





Usage:

The edge of the rough cloth can be decorated with cloth strips presser foot, helps you easily make the edging width less than 7mm. Straight stitches, zigzag stitches or decorative stitches can be used

Using method:

1. Before installing the presser foot, please guide groove binding into the presser foot, to ensure that the groove rolling pressure foot selvage alignment.

2. Pull out binding strips from the rear of the presser foot.

3. Install the presser foot.

4. Adjust the needle position, until the needle point is located in the border edge.

Tip: if the needle can not be adjusted to the appropriate position on the edge, you can loosen the pressure foot screws, adjusting guide groove position and move around.

Applicable model: XL2600/BM2600/XL5500/XL5600/BC2500/ES2400/NV30/NV400/NV1200/NV4000

Specifications:

Material: metal

Size: approx. 5.5 X 2 X 1.5cm/2.16 X 0.78 X 0.59inch

Weight: approx. 17g

Notes:

1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color which is showed on the pictures. Thank you!

2. Please forgive 1-3cm measuring deviation due to manual measurement.

1 X Presser Foot

Drop Shipping Service.

1.There is no limited stock to fulfill the orders on a daily basis.

2.For USA/CA /RU the shipping is quickly.

3.Priority delivery,fast delivery in 48 hours.

4.No invoice or receip or promotional materials included.

Worldwide Shipping. (Except some countries and APO/FPO) 1. Orders processed timely after the payment verification.

2. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.

3. The images shown are not the actual item and are for your reference only.

4. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season.

5. If you have not received your orderafter 30 days from payment, please contact us. We will trace your order and get back to you asap. Our goal is customer satisfaction!

6. Delivery Time:

1. You have 7 days to contact us and 30 days to return it from the date received. If the item is in your possession more than 7 days, it will be considered used and WE WILL NOT ISSUEA REFUND OR REPLACEMENT to you. There are NO EXCEPTIONS!

Shipping cost is bear by both seller and buyer in half.

2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID.

3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from Mtccitytech.org. OR, you may choose to have a replacement.

4. We will bear all the shipping cost if the product(s) is (are) not as advertised.

Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN

EXPIRED WARRANTY.

You agree to all of the above-listed policies upon ordering on Mtccitytech.org!

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can perform up your satisfaction.

It is impossible to address issues if we do not know about them!

  • Material: Stainless Steel
  • Brand Name: VKTECH
  • Size: approx. 5.5 X 2 X 1.5cm/2.16 X 0.78 X 0.59inch
  • Use: Knitting
  • Material: metal
  • Type: Sewing Machine Parts
  • Weight: approx. 17g

  • Package Size: 8cm x 6cm x 8cm (3.15in x 2.36in x 3.15in)
  • Package Weight: 0.017kg (0.04lb.)
  • Unit Type: piece

  • Author: Katyaaaa91
  • Date: 2018-04-06
  • quality normal 6 ordered приехало march 3, match description
  • 5/5