Motors & Parts

CNC Router Kit 3 Axis, 3pcs TB6600 4.5A stepper motor driver +3pcs Nema23 270 Oz-in motor+ 5 axis interface board+ power supply

Rating
$185.89 $174.74





1 x 24V/10A switching power supply 3 x 1 Axis TB6600 stepper motor driver 3 x 57HS76 3A 270 oz/in stepper motor 1 x 5 axis breakout board 1 x DB25 parallel cable 1 x USB cable 3 x signal cables English user manual will send by a CD or Email

5 axis breakout board

1,fully support of MACH3 and other computer software support for parallel port control.

2,USB power supply and peripherals powered phase separation to protect computer security.

3,peripheral wide voltage input,12-24V, and anti-reverse function.

4,all of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.

5,all the way to the relay output port, control spindle switch. Output port P17 mouth.

6,all the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.

7,open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.

8,P1 as PWM outputs can be controlled with optocoupler input spindle governor.

9,can be accessed by a common cathode or common anode input level to 5V drive.

10, Output pins with the expansion interface can 2.54mm pin 2.54mmXH-Block;

TB6600 Single Axis Stepper Motor Driver

Characteristics:

1.DC power input type:12V~40V;

2.Output current:0~4.5A, stepless adjustable;

3.Mircostep:1,2,4,8,16;

4.Automatic half current function: half or full current can be Selected through the switch;

5.Protect form : Overheated protection, over-current protection;

I/O Ports:

1.24V+:DC power positive pole

2.GND:DC power cathode

3.A+ A-:Stepping motor one winding

4.B+ B-:Stepping motor other winding

5.CLK-:Stepping pulse input+5V (Rising edge effective , rising edge duration >10μS)

6.CW-:Stepping motor direction input, voltage level touched off, foreward , low reverse

7.ENA-: motor free

8.+5V: Signal common terminal

stepper motor

Model

57HS76

Number of phases

2-phase

Number of lines

4-wire

Phase voltage

3.08V

Phase current

3A

Resistence

1.1Ω

Inductance

3.6mH

Torque

1.89N.M(270 Oz-in)

Shaft Diameter

8mm

Axial length

21mm

Side length

57mm

High

76mm

Weight

1100g

RED: A+

BLUE: A-

GREEN: B+

BLACK: B-

Switching power supply

1. the range of AC input voltage is changed by the switch

2. high-efficiency, high reliability

3.100% full load burn-in test

4. Protections: Short circuit / overload / over voltage / over temperature

5. built-in cooling DC fan control

6. Working frequency is 25 kHz

7. Input Voltage:220V

8. Output Voltage:24V

9. Output Current:10A

10. Output Power:250W

11. 1 year warranty

12.Size:215 * 115 * 50mm(L*W*H)

  • Brand Name: HYONGC
  • Power supply: 250W,24V/10A
  • Model Number: CNC 3 Axis TB6600 Kit
  • interface board: 5 Axis
  • Place of Origin: Jiangsu China(mainland)
  • motor: nema23 270 Oz-in 3A
  • Voltage: 24V
  • Driver: 3 Axis,4.5A
  • Motor Type: Stepper Motor
  • Power Supply: DC

  • Package Size: 30cm x 30cm x 20cm (11.81in x 11.81in x 7.87in)
  • Package Weight: 5.6kg (12.35lb.)
  • Unit Type: Set