Milling Cutter

3pcs 0.5mm hrc60 D0.5*D4*50 2 Flutes golden Micro Grain Spiral Bit Milling Tools Carbide CNC Endmill Router bits

Rating
$20.89





Remind :

The picture only for reference.

HRC55 Carbide 2 Flutes square flat End Mills ,CB carbide material ,TIALN coating ,can resist the high temperature of 700-800

All hrc 55 flat endmills link: Item No. Flutes Diameter Shank Diameter Flutes length overall length Flutes link CP-D3-D3-50 3.0 3 8.0 50 2 or 4 CP-D1.5-D4-50 1.5 4 4.0 50 2 or 4 CP-D1-D4-50 1.0 4 3.0 50 2 or 4 CP-D2.5-D4-50 2.5 4 8.0 50 2 or 4 CP-D2-D4-50 2.0 4 6.0 50 2 or 4 CP-D3.5-D4-50 3.5 4 11.0 50 2 or 4 CP-D3-D4-50 3.0 4 8.0 50 2 or 4 CP-D4-D4-50 4.0 4 11.0 50 2 or 4 CP-D5-D5-50 5.0 5 13.0 50 2 or 4 CP-D1.5-D6-50 1.5 6 4.0 50 2 or 4 CP-D1-D6-50 1.0 6 3.0 50 2 or 4 CP-D2.5-D6-50 2.5 6 8.0 50 2 or 4 CP-D2-D6-50 2.0 6 6.0 50 2 or 4 CP-D3.5-D6-50 3.5 6 11.0 50 2 or 4 CP-D3-D6-50 3.0 6 8.0 50 2 or 4 CP-D4.5-D6-50 4.5 6 13.0 50 2 or 4 CP-D4-D6-50 4.0 6 11.0 50 2 or 4 CP-D5-D6-50 5.0 6 13.0 50 2 or 4 CP-D6-D6-50 6.0 6 15.0 50 2 or 4 CP-D7-D8-60 7.0 8 20.0 60 2 or 4 CP-D8-D8-60 8.0 8 20.0 60 2 or 4 CP-D3.0-D3-75 3.0 3 8.0 75 2 or 4 CP-D1.0-D4-75 1.0 4 3.0 75 2 or 4 CP-D1.5-D4-75 1.5 4 3.0 75 2 or 4 CP-D2.0*D4-75 2.0 4 11.0 75 2 or 4 CP-D2.5-D4-75 2.5 4 11.0 75 2 or 4 CP-D3.0-D4-75 3.0 4 11.0 75 2 or 4 CP-D4.0-D4-75 4.0 4 20.0 75 2 or 4 CP-D5.0-D5-75 5.0 5 13.0 75 2 or 4 CP-D5.0-D6-75 5.0 6 25.0 75 2 or 4 CP-D6.0-D6-75 6.0 6 25.0 75 2 or 4 CP-D8.0-D8-75 8.0 8 25.0 75 2 or 4 CP-D10-D10-75 10.0 10 25.0 75 2 or 4 CP-D9-D10-75 9.0 10 25.0 75 2 or 4 CP-D11-D12-75 11.0 12 30.0 75 2 or 4 CP-D12-D12-75 12.0 12 30.0 75 2 or 4 CP-D3.0-D4-100 3.0 4 30.0 100 2 or 4 CP-D4.0-D4-100 4.0 4 30.0 100 2 or 4 CP-D6.0-D6-100 6.0 6 30.0 100 2 or 4 CP-D8.0-D8-100 8.0 8 40.0 100 2 or 4 CP-D10-D10-100 10.0 10 45.0 100 2 or 4 CP-D12-D12-100 12.0 12 45.0 100 2 or 4 CP-D6.0-D6-150 6.0 6 40.0 150 2 or 4 CP-D8.0-D8-150 8.0 8 40.0 150 2 or 4 CP-D10-D10-150 10.0 10 45.0 150 2 or 4 CP-D12-D12-150 12.0 12 45.0 150 2 or 4

Suitable For:

Cutting, end milling, slotting on:

· Stainless-steel, cast iron, copper, aluminum, carbon steel, die steel, etc;

· Hard wood, plywood, etc;

Features:

· Use top quality imported tungsten steel carbide from Taiwan;

· Excellent chip removal effect!

· High surface finish, excellent work!

· Long service life;

Payment terms:

Escrow, VISA, MasterCard, Bank Transfer, Western Union and so on are available.

When you add items into your cart, you should check them and then go ahead with payment.

Please make sure your shipping address is correct. We will only follow your address listed in the Mtccitytech.org for the shipment. We have no responsibility for shipping address provided. Due to the security reasons, it is not allowed that address be changed through email.

Payment must be received 7 days after the bid ended. We reserve the right for selling the article to others if no payment is made 7 days later.

Shipping terms:

Your item will be dispatched within 2 business days after we verify payment received. We will inform you if we need more time to prepare. After the item dispatched, the item would need some days for delivery.

  • Flutes: 2 flutes
  • Type: End Mill
  • Overall length: 50mm
  • Coating: TiN
  • Model Number: CP-D0.5-D4-50-HRC60
  • Diameter: 0.5MM
  • Suitable Materials: stainless-steel,cast iron,Cu,Al,hard wood
  • Worked Material Hardness: HRC60
  • Material: Carbide
  • Flutes length: About 1mm
  • Brand Name: JERRAY
  • Overall Length: 50MM
  • Shank diameter: 4mm

  • Package Size: 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in)
  • Unit Type: lot (3 pieces/lot)
  • Package Weight: 0.06kg (0.13lb.)