Measurement & Analysis Instruments

Pro Differential probes DC 50Mhz ADP50 Max Voltage 6500V Tektronix HP OEM Taiwan

Rating
$299.00 $284.05





Pro Differential probes DC 50Mhz ADP50 Max Voltage 6500V Tektronix HP OEM Taiwan

Features: Do not use DP-50/100 above 6500V (DC + peak AC) between ground and the input or 6500V (DC + peak AC) between the input lead. The DP-50/100 converts the high voltage differential input signal to a low voltage ground referenced signal for display on any Oscilloscope. The output BNC of DP-50/100 is calibrated to drive a high impedance (1 Mohm) load.

Specifications:

Differential Voltage DC + pike AC: 6500V

Bandwidth ( 50 ohm load -3dB ): 50MHz( x 100 25MHz)

Common Mode Voltage DC + pk AC: 6500V

Common Mode Voltage RMS CAT II: 6500V

Common Mode Voltage RMS CAT IIIl: 6500V

Attenuation ( Switchable ):X 100, X 200, X 500, X 1000

Input R ( Each input ): 27Mohm +/- 1%

Input C ( Each input ): 2.5 PF +/- 2%

Maximum Operation Voltage( DC + pk AC )

10,000 : 1

100 Hz : > 1,000 : 1

1 MHz : > 300 : 1

Noise ( Into 50 ohm load ):

Accuracy ( at 20 ~ 30C 70% RH after 20 minutes ):

Instruction: Connect the output BNC of DP-50/100 to the input BNC of the Oscilloscope by the accessory BNC cable. Adjust the vertical offset of the Oscilloscope if necessary. Set the select proper range of the DP-50/100 and the V / DIV of the Oscilloscope according to the scale conversion chart. NOTE: If the voltage of the input signal exceeds the linear range of the setting range. The signal output of the DP-50/100 would not accurately; the wave form display will be cut off. Scale conversion chart: The effective V / DIV are the attenuation factor of X 100 ~ X 1000 multiplied by the scale factor of the Oscilloscope. It will be twice when the 50 ohm load was used. For example, with the range set at X 200, and the scope set to 0.5V / DIV, the effective V / DIV equals 200 X 0.5 or 100V, when the 50 ohm load was used, it becomes 200V, the power consumption will increase too.

Warning: Do not use DP-50/100 above 6500V (DC + peak AC) between ground and the input or 6500V (DC + peak AC) between the input lead. Do not operate DP-50/100 in wet or damp condition. Do not operate DP-50/100 in an explosive atmosphere Do not immerse DP-50/100 in liquids. Do not operate DP-50/100 without covers. Please change the battery when the “LOW BATT" LED is lighted. At this time DP-5/100 can operate but not guaranteed the accuracy.

Return Policy:

If you are not satisfied with your order, you can return/exchange in 14 days with full money refund (except shipping) as long as the products are in the original shape. Please DO contact us before you ship your order back, we will issue a RMA number and return address, the RMA number should appear on the package in order to get refund or exchange.

About Shipping:

USA order will ship from our USA warehouse by USPS priority mail 3-4 business days. European customer: Shipping from our UK warehouse, UK customer can get 3-5 days service and other Europe customer get 4-9 days service with no duty tax. All other order will ship from our China warehouse by registered air mail, it takes around 7-14 business days to arrive, fast shipping is available by paying $25.00 more upgrade to express shipping with track number, thanks.

Customer support/Feedback:

Your satisfaction is our highest priority, in case if you are not satisfied with your order or didn\'t get your order within reasonable time, please do contact us, we will try our best to help you in 1-2 business days. If you are satisfied with your order, please be kind to leave positive feedback for us, your valued suggestion is highly appreciated, we will send coupon or free gift upon your next purchase for any good suggestions we will take. If you have any questions and concerns, please feel free to e-mail to us or by phone (408)329-7985(408)329-7985or Fax (866) 571-5680. Thanks for interesting in our products and good luck.

  • Brand Name: AideTek
  • DIY Supplies: Electrical

  • Package Weight: 1.5kg (3.31lb.)
  • Unit Type: piece
  • Package Size: 10cm x 5cm x 3cm (3.94in x 1.97in x 1.18in)