Car Video Surveillance

FUWAYDA Wireless Color CCD Car Rear View parking Camera for Mitsubishi Pajero V3 V6 V8 Zinger 4.3 Inch foldable LCD TFT Monitor

Rating
$58.98 $47.18





Products Recommended

This is our store link: ( )

This monitoring equipment is suitable for the Mitsubishi Pajero V3 V6 V8 Zinger

Product Description

Designed For : Mitsubishi

Mitsubishi Pajero V3 V6 V8 Zinger

with the 2.4 GHz wireless module, no need to turn the video cable inside the carless labor work, easy install Please kindly take note as below: To be safe, Please notice the size on the picture before buying. Please contact us, if you are not familiar with our products.Make sure that the size of our product as nearly the same as your car’s license plate light. In different countries, even for the same style car the size of license plate light may be different. This camera will replace the license plate lights.

Monitor Specification:

Housing material:ABS plastic

- Screen size: 4.3 inch

- Pixel: 480(W)×RGB×272(H)

-Contrast: 350:1

- Aspect ratio: 16:9

- Power supply: DC 12V

- Monitor folded size: 5.2 * 4.5 * 0.98 inches

2 Video Input

AV Signal auto detect power on/off

Auto switch when reversing

Video transmitter& receiver 1. 100% brand new, high quality, easy installation 2. Take one minute to get your camera become a wireless camera 3. Wireless 2.4 GHz transmitter/receiver set ( Vehicle voltage12 Volt) 4. Work range: Up to about 50m (hollowness) 5. Connect to rear view camera and front video screen 6. Fit all RCA composite video connections 7. Power: DC 12V 8. Transmitter /receiver cable: 1.5m

Camera Specification:

Image device: Hi-definition Color CCD

TV system: NTSC 60HZ / PAL 50HZ

Effective pixels: 628X582 pixels

Resolution: 520 TV lines

Lens Angle: 170 degree

Power supply: DC 12V

Waterproof Class:Ip 68 Operating temperatuere:-20+80 RH95% Storage temperature30 + 80 working Power(DCV):12V Current consumption: 90mA Max

Package Included: 1x4.3" LCD Car Monitor 1xCCD Camera 1x2.4 Ghz Transmitter 1x2.4 Ghz Receiver 1xMonitor Power Cable

How to Install a Camera with the Wireless Module: Take out your stock license plate light at the back of your car. Fix the camera to where the stock license plate light was. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power Connect the wireless module (transmitter) to your camera via the two cables - yellow plug for AV output and black plug for power Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative Connect the wireless module (receiver) to your car monitor - yellow plug for AV input. Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative You will see the images when your reverse car.

Returns:

We do our best to serve our each customer the best that we can.

We will refund you for items returned within 7 days of you receiving them, for any reason. A full refund will be given if items are returned in their original condition.

Merchandise which is damaged or missing components is not refundable.

Buyers are responsible for return shipping with proper packaging.

On receiving items, we will refund you immediately.

Warranty &Maintenance:

We provide 1 month replacement and 12 months maintenance warranties. Items can be replaced during the first month or maintained for the first year.

***** Buyers are only responsible for the return shipping fees for warranty items.(In most cases, buyer will only have to return the problem components rather than the entire package.).

Before returning items, please make sure you get our (the seller?s) return address, and write ?gift? on the delivery detail sheet. Please use regular postal service and send us the tracking number. As soon as we receive the items, we will repair or exchange them ASAP.

Feedback:

Please leave us a good feedback if item received in good condition;

For Buyers that is not satisfactory with your shopping Experience, you can always contact us first before you left outcome feedback;every problem could be worked out via good communication between both sides.

  • Car Maker: Mitsubishi
  • Lens Material: Plastic + Glass
  • Brand Name: FUWAYDA
  • Wire or Wireless: Wireless
  • Shell Material: Plastic
  • Guiding Line: Yes
  • Material Type: Abs

  • Package Size: 15cm x 15cm x 8cm (5.91in x 5.91in x 3.15in)
  • Package Weight: 0.55kg (1.21lb.)
  • Unit Type: piece