Beads & Jewelry Making

220V Magnetic Tumbler Polisher for Jewelry Tools Magnetic Polishing Machine with 200g magnetic pins FREE Jewelry tools machine

$184.80 $140.45

Type2:220V Polishing Machine

220V Magnetic Tumbler Polisher for Jewelry Tools Magnetic Polishing Machine with 200g magnetic pins FREE Jewelry tools machine

Voltage:220V-110V, 50/60HZ,0.2KW,


Bucket Dimension:155*115mm,

Packing Size:240*235*345mm,


tumbler for fimishing gold and platinum jewelries in a short time.High speed rotation of the magnet disc.

Features:timer,clockwise and anti-clockwise rotation.

Specially designed for fixed time tumbling Auto-reverse function enables thorough tumbling.With 4 variable speeds control so that jewelries can be polished with good care.

Cleaning the Stainless Steel Shot

Stainless steel shot should be kept as clean as possible at all times. We recommend that shot be cleaned after

every second or third use.

1. steel shot cleaner according to the directions on the bottle.

2. Add the steel shot into the tumbler.

3. Add enough diluted shot cleaner to cover about 1” over the steel shot.

4. If the water appears dirty after tumbling, rinse the shot and repeat the process (the shot is clean when

the liquid cleaner is the same color it was before it was put in the tumbler).

Care and Maintenance of Tumbler

1. Before operating the tumbler, be sure that the bearings are cradled in the end plates of the tumbler.

2. Be sure both shafts turn freely; a binding shaft may throw the barrel off its rollers.

3. Oil the bearings at the beginning of the operation and once a month after the initial oiling; use oil sparingly.

4. Do not spill abrasives on bearings or motor.

5. Use care; this motor will become hot to the touch when running. This is normal but requires caution around the motor.

6. Tumblers are protected by a thermal overload device; if the motor overheats, the unit automatically shuts off.

If this happens, check for bound bearings or excessive weight; wait for the motor to cool, and it will restart by itself.

7. To assure long belt life, make certain that motor and drive pulleys are in line. Necessary adjustments can be made by

adjusting the set-screw on the motor pulley.

8. If the barrel or the roller guides become wet, dry them thoroughly to prevent barrel slippage.

Repair Service

Factory repairs are done promptly and reasonable cost. If you wish, you can send your equipment directly to the factory service Dept. Be sure to give your street address and telephone number. The equipment should be accompanied by a brief note describing the problem. Estimates will be made u pon request.


1. In order to make sure you get the goods fast and successful, pls provide your TAX ID which buyer from Brazil when ordering the goods. Thanks.

2. We can do low value as your requirement in the invoice, but pls make sure you have ability to do customs clearance.

3. We can customsize 110V machine and other standard plug to you, the MOQ is 4 pcs, usually the plug of the machine is Europe standard in stock.

1. We can do low value as your requirement in the invoice, but pls make sure you have ability to do customs clearance.

2. When you order the goods the item show " This Supplier/Shipping Company does not deliver to your selected Country/Region. " Pls contact us directly. Thanks

3.If you come from Russia , in order to make sure the goods can be recieved successfully, please leave your full name with three words . Or we will not assum the respomsibility once the goods lost during shipping. Thanks for your cooperation in advance.

We accept Alipay here

All major card are accepted

Through secure payment processor Escrow

1.WORLDWIDE SHIPPING. (Except some countries and APO/FPO)

2. Orders processed timely after the payment verification.

3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.

4. The images shown are not the actual item and are for your reference only.

5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season.

6. If you have not received your order after 30 days from payment, please contact us. We will trace your order and get back to you asap. Our goal is customer satisfaction!

7. Delivery Time:

For the machine, 12 months manufacturer\'s warranty for defective items.

If the tool is defective with 3 months, you can send it to us. We will send you a new one or give you refund after we receiving the defective item. But the extra shipping fee should be paid by yourself.

1.If you are unsatisfied with items, you can return it to us within 7days.

2.If item comes in bad condition before you use it, please free feel to tell us.We can refund or resend to you.

We will leave positive feedback after receiving the payment.

Please contact us in time if you are not satisfied with the item and wanna leave a bad feedback or open a dispute.

Negative feedback can not solve the problem. You must tell us the problem so that we can fic it and make you happy.

  • Time tumbling: 0-60 minutes
  • Type1: Magntic Tumbler Polisher
  • Speed: Variable Speed
  • Packing Size: 230*240*340mm
  • Dimension: 200*200*300mm
  • Weight: 7.5kg
  • Voltage: 220V-110V
  • Bucket Dimension: 100*105mm
  • Model Number: ZK-0019
  • Item Type: Jewelry Tools & Equipments

  • Unit Type: piece
  • Package Weight: 8.5kg (18.74lb.)
  • Package Size: 24cm x 24cm x 35cm (9.45in x 9.45in x 13.78in)