3D Printers & 3D Scanners

MKS LV8729 stepper motor driver 4-layer substrate ultra quiet driver LV8729 driver support 6V-36V full microstep driver controll

Rating
$4.09 $3.64





LV8729 driver module with 128 subdivisions is a good choice for Nema stepper motor whose current is less than 1.5A, which makes motor steady, quiet and precise. Specifications: Dimensions: 1.5mm * 2.0mm (Same with the A4988 and DRV8825) Maximum drive current: 1.5A (Default 0.8A) Operating voltage: 6V-36V, the proposed voltage is 12V Support subdivisions: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128 Product Process: four layer PCB board In the 64 subdivision or 128 subdivision to have a better ultra-quiet effect. Shipping list(Per unit): LV8729 * 1pc heat sink with sticker * 1pc Note: Please make sure the connecting direction is right, or it will probably burn the driver chip and controller board. Recommend to do a good job of cooling for the module. Driver current algorithm and its adjustment: 1. Driver current algorithm: i=Vref/0.5, the default Vref about 0.4V, so the default current 0.8A, and maximum current 1.5A 2. Please DO NOT connect the motors when measuring the voltage, or it\'s easy to burn the drive. 3. Please connect both the power supply and the USB for power when measuring the voltage. 4. Minor adjustment for potentiometer driver. Adjust it again after measurement to avoid burning driver by excessive current.

5. To increase the current by rotating the potentiometer clockwise slowly, and anticlockwise to reduce.

  • Color : black
  • subdivisions : 128
  • dimensions : 1.5mm*2.0mm
  • range: for lerdge 3d printer parts
  • Brand Name: FYSETC
  • with heat sink : yes
  • Item Type: Driver
  • name: mks lv8729
  • application : 3d printing
  • Model Number: LV8729
  • Product Process : four layer PCB board
  • maximum drive current : 1.5A(Default 0.8A)
  • Support subdivisions: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128

  • Unit Type: piece
  • Package Size: 15cm x 10cm x 4cm (5.91in x 3.94in x 1.57in)
  • Package Weight: 0.07kg (0.15lb.)

  • Author: Derby Larez 8
  • Date: 2018-01-27
  • goods come. quality is good.
  • 5/5

  • Author: Gangbangquartet
  • Date: 2017-10-31
  • премиально packed, спаяны good, there are traces of not отмытого flux, but not critical. come on time.
  • 5/5

  • Author: Girl4you01
  • Date: 2018-04-11
  • sbase mks operate based printer. problems like no.
  • 5/5

  • Author: Di In Love
  • Date: 2017-11-27
  • Item arrived in 50 days well packed in paper box with another 4 pieces. Not yet tested, but looks ok.
  • 5/5